Vega VEGABAR 82 Quick Setup Manual

Also see for VEGABAR 82: Product information Operating instructions Quick setup guide Operating instructions Operating instructions

Contents

115 Set up with the display and adjustment moduleVEGABAR 82 • HART and accumulator pack46307-EN-1311255 Set up with the display and adjustmentmodule5.1 Insert display and adjustment moduleThe display and adjustment module can be inserted into the sensorand removed any time. Four positions displaced by 90° can be se-lected. It is not necessary to interrupt the power supply.Proceed as follows:1. Unscrew the housing cover2. Place the display and adjustment module in the requested posi-tion onto the electronics and turn to the right until it snaps in3. Screw housing cover with inspection window tightly back onRemoval is carried out in reverse order.The display and adjustment module is powered by the sensor, an ad-ditional connection is not necessary.Fig. 6: Installing the display and adjustment module in the electronics compart-ment of the single chamber housing