Vega VEGADIS 82 Operating Instructions Manual

Also see for VEGADIS 82: Operating instructions Operating instructions Operating instructions Operating instructions

Vega VEGADIS 82 Operating Instructions Manual Manual pdf 45 page image

456 Set up with the display and adjustment moduleVEGADIS 82 • 4 … 20 mA/HART45300-EN-170724In this menu item, you read out the instrument type and the serialnumber:6.9 Parameter adjustment - Sensors from othermanufacturers via Generic HARTThe main menu is divided into three areas with the following functions:Setup: Settings, for example measurement loop name, PV unit, Up-per and Lower Range, dampingDiagnosis: Information, for example on the device statusInfo: Instrument nameThe submenu points are described below.In the menu item "Sensor TAG" you edit a twelve-digit measurementloop designation.You can enter an unambiguous designation for the sensor, e.g. themeasurement loop name or the tank or product designation. In digitalsystems and in the documentation of larger plants, a singular desig-nation must be entered for exact identification of individual measuringpoints.The available digits include:• Letters from A … Z• Numbers from 0 … 9• Special characters +, -, /, -In this menu item, the adjustment unit of the instrument is determined.The selection determines the displayed unit in the menu items "LowerRange" and "Upper Range".Unit of measurement:Enter the requested parameters via the appropriate keys, save yoursettings with [OK] and jump to the next menu item with the [ESC] andthe [->] key.Info - Instrument nameMain menuSetup - Sensor TAGSetup - PV unit