Vega VEGAFLEX 62 Operating Instructions Manual

Also see for VEGAFLEX 62: Operating instructions Product information Operating instructions

Vega VEGAFLEX 62 Operating Instructions Manual Manual pdf 6 page image

During the entire duration of use, the user is obliged todetermine the compliance of the required occupational safetymeasures with the current valid rules and regulations and alsotake note of new regulations.2.5 Safety approval markings and safety tipsThe safety approval markings and safety tips on the devicemust be observed.2.6 CE conformityThe protection goals of the EMC Directive 2004/108/EC (EMC)and the Low Voltage Directive 2006/95/EC (LVD) are fulfilled.Conformity has been judged according to the followingstandards:EMC: EN 61326-1: 2006(electrical instruments for control technology and laboratoryuse - EMC requirements)l Emission: Class Bl Susceptibility: Industrial areasLVD: EN 61010-1: 2001(safety regulations for electrical measurement, control andlaboratory instruments - part 1: General requirements)2.7 Fulfilling of NAMUR recommendationsWith respect to interference resistance and emitted interfer-ence, the NAMUR recommendation NE 21 is fulfilled.With respect to compatibility, the NAMUR recommendationNE 53 is fulfilled. This applies also to the correspondingindicating and adjustment components. VEGA instruments aregenerally upward and downward compatible.l Sensor software for DTM VEGAFLEX 62 HART, PA or FFl DTM VEGAFLEX 62 for adjustment software PACTwarel Indicating and adjustment module for sensor softwareThe parameter adjustment of the basic sensor functions isindependent of the software version. The range of availablefunctions depends on the respective software version of theindividual components.The software version of VEGAFLEX 62 can be determined asfollows:6 VEGAFLEX 62 • Profibus PA2 For your safety31839-EN-080716