also find the appropriate certificates. In a PDM environment, an EDD(Electronic Device Description) is also required to enable the full rangeof sensor functions (also available as a download).A CD with theappropriate files can be ordered via e-mail under info@de.vega.com orby phone from one of the VEGA agencies under the order number"DRIVER.S".3.3 OperationThe instrument can be adjusted with the following adjustment media:l With indicating and adjustment modulel with the suitable VEGA DTM in conjunction with an adjustmentsoftware according to the FDT/DTM standard, e.g. PACTware andPCl with the adjustment program PDM3.4 Packaging, transport and storageYour instrument was protected by packaging during transport. Itscapacity to handle normal loads during transport is assured by a testaccording to DIN EN 24180.The packaging of standard instruments consists of environment-friendly, recyclable cardboard. For special versions, PE foam or PE foilis also used. Dispose of the packaging material via specialisedrecycling companies.Transport must be carried out under consideration of the notes on thetransport packaging. Nonobservance of these instructions can causedamage to the device.The delivery must be checked for completeness and possible transitdamage immediately at receipt. Ascertained transit damage orconcealed defects must be appropriately dealt with.Up to the time of installation, the packages must be left closed andstored according to the orientation and storage markings on theoutside.Unless otherwise indicated, the packages must be stored only underthe following conditions:l Not in the openl Dry and dust freel Not exposed to corrosive medial Protected against solar radiationl Avoiding mechanical shock and vibrationl Storage and transport temperature see chapter "Supplement -Technical data - Ambient conditions"l Relative humidity 20 … 85 %PackagingTransportTransport inspectionStorageStorage and transporttemperatureVEGAFLEX 67 • Profibus PA 113 Product description32313-EN-120329