Vega VEGAMET 624 Supplementary Instructions Manual

Also see for VEGASCAN 693: Supplementary instructions Operating instructions Operating instructions

Contents

Vega VEGAMET 624 Supplementary Instructions Manual Manual pdf 13 page image

2.5 Delete the settings with the commandCLEARSTOREWith the command CLEARSTORE, the settings of the optionSTORE are deleted in the EEPROM and the automaticrepetition of the measured values is stopped.2.6 Measured value enquiry with command %2.6.1 % individual enquiryAs answer on the individual enquiry, the PC/DCS value statedin the enquiry is delivered. The measured value is transmittedwith three positions in front of the decimal point and oneposition after the decimal point without unit.Number of bytes SignIdentifier 1 %Begin 1 … 3 001 … 030 or 1 … 30End identification 1 CRl Identifier: "%" (1 character)l Start: No. of the requested PC/DCS output (1 … 3 signs)l End identification: Carriage Return CR (1 sign)Total length of the telegram: 3 … 5 signsNumber of bytes SignT1 1 =DCS no. 3 001 … 030T2 1 #Value 5 … 6 -067.3T3 1 %End identification 1 CRl T1: "=" (1 sign)l DCS no.: No. of the PC/DCS output as 3-digit decimalnumberl T2: "#" (1 character)l Value: Numerical value of the PC/DCS output or withinterferred measured value the text "FAULT"Formatting of the value:Enquiry of the control systemAnswer from the signal con-ditioning instrumentModbus-TCP, VEGA ASCII protocol - VEGAMET 624/625, VEGASCAN 693, PLICSRADIO 13VEGA ASCII protocol30768-EN-070730