Vega VEGAPULS 61 Operating Instructions Manual

Also see for VEGAPULS 61: Operating instructions Quick setup guide Operating instructions Operating instructions Quick setup guide

Contents

Vega VEGAPULS 61 Operating Instructions Manual Manual pdf 35 page image

356 Set up the sensor with the display and adjustment moduleVEGAPULS 61 • Modbus and Levelmaster protocol41717-EN-160224Approx. 60 minutes after the last pressing of a key, an automatic resetto measured value indication is triggered. Any values not confirmedwith [OK] will not be saved.6.4 Measured value indication - Selectionnational languageWith the [->] key you move between three different indication modes.In the first view, the selected measured value is displayed in largedigits.In the second view, the selected measured value and a correspond-ing bar graph presentation are displayed.In the third view, the selected measured value as well as a second se-lectable value, e.g. the temperature of the electronics, are displayed.During the initial setup of an instrument shipped Ex works, use the"OK" key to get to the menu "National language".This menu item is used to select the national language for further pa-rameter adjustment. You can change the selection via the menu item"Setup - Display, Menu language".With the "OK" key you move to the main menu.6.5 Parameter adjustmentThe instrument is adapted to the application conditions via the pa-rameter adjustment. The parameter adjustment is carried out with anadjustment menu.The main menu is divided into five sections with the following func-tions:Setup: Settings, e.g., for measurement loop name, medium, applica-tion, vessel, adjustment, signal outputDisplay: Settings, e.g., for language, measured value display, lightingDiagnosis: Information, e.g. on instrument status, pointer, measure-ment certainty, simulation, echo curveFurther settings: Instrument unit, false signal suppression, linearisa-tion curve, reset, date/time, reset, copy functionMeasured value indica-tionSelection of nationallanguageMain menu