Vega VEGAPULS 62 Operating Instructions Manual

Also see for VEGAPULS 62: Operating instructions Safety manual Quick setup guide Quick setup guide Operating instructions

Contents

Vega VEGAPULS 62 Operating Instructions Manual Manual pdf 37 page image

5.6 Wiring plan - version IP 66/IP 68, 1 bar+-12Fig. 31: Wire assignment, connection cable1 brown (+) and blue (-) to power supply or to the processing system2 Shielding5.7 Switch on phaseAfter connecting VEGAPULS 62 to power supply or after avoltage recurrence, the instrument carries out a self-check forapprox. 30 seconds:l Internal check of the electronicsl Indication of the instrument type, the firmware as well asthe sensor TAGs (sensor designation)l Output signal jumps briefly (approx. 10 seconds) to the setfault currentThen the corresponding current is outputted to the cable (thevalue corresponds to the actual level as well as the settingsalready carried out, e.g. factory setting).Wire assignment, con-nection cableSwitch on phaseConnecting to power supplyVEGAPULS 62 • 4 ... 20 mA/HART 3728435-EN-080402