Vega VEGAPULS 62 Operating Instructions Manual

Also see for VEGAPULS 62: Operating instructions Safety manual Quick setup guide Quick setup guide Operating instructions

Contents

Vega VEGAPULS 62 Operating Instructions Manual Manual pdf 34 page image

6 Setup with the indicating andadjustment module PLICSCOM6.1 Short descriptionThe indicating and adjustment module PLICSCOM is used formeasured value display, adjustment and diagnosis. It can bemounted in the following housing versions and instruments:l All sensors of the plics® instrument family, in the single aswell as in the double chamber housing (optionally in theelectronics or connection compartment)l External indicating and adjustment unit VEGADIS 61From a hardware revision …- 01 or higher of PLICSCOM aswell as the corresponding sensor, an integrated backlight canbe switched via the adjustment menu. The hardware revision isstated on the type label of the PLICSCOM or the sensorelectronics.Information:This function is for instruments with StEx, WHG or shipapproval as well as country-specific approvals such as thoseacc. to FM or CSA, available at a later date.Note:You will find detailed information on the adjustment in theoperating instructions manual of the indicating and adjustmentmodule PLICSCOM.6.2 Installing the indicating and adjustmentmodule PLICSCOMPLICSCOM can be inserted or removed at any time. It is notnecessary to interrupt the power supply.Proceed as follows:1 Unscrew the housing cover2 Place PLICSCOM in the desired position on the electronics(you can choose any one of four different positions - eachdisplaced by 90°)3 Press PLICSCOM lightly onto the electronics and turn it tothe right until it snaps in.Function/ConfigurationInsert/remove PLICSCOMSetup with the indicating and adjustment module PLICSCOM34 VEGAPULS 62 - 4 ... 20 mA/HART28435-EN-060317