Vega VEGAPULS 66 Quick Setup Manual

Also see for VEGAPULS 65: Quick setup guide Operating instructions Safety manual Quick setup guide Operating instructions

Contents

Vega VEGAPULS 66 Quick Setup Manual Manual pdf 11 page image

115 Set up with the display and adjustment moduleVEGAPULS 66 • Foundation Fieldbus47141-EN-1802265 Set up with the display and adjustmentmodule5.1 Insert display and adjustment moduleThe display and adjustment module can be inserted into the sensorand removed again at any time. You can choose any one of four differ-ent positions - each displaced by 90°. It is not necessary to interruptthe power supply.Proceed as follows:1. Unscrew the housing lid2. Place the display and adjustment module on the electronics in thedesired position and turn it to the right until it snaps in.3. Screw housing lid with inspection window tightly back onDisassembly is carried out in reverse order.The display and adjustment module is powered by the sensor, an ad-ditional connection is not necessary.Fig. 6: Installing the display and adjustment module in the electronics compart-ment of the single chamber housing