7 Setup with PACTware and other adjustment programs7.1 Connect the PC via VEGACONNECT . . . . . . . . . . . . 487.2 Parameter adjustment with PACTware . . . . . . . . . . . . 497.3 Parameter adjustment with AMS™ and PDM . . . . . . . 507.4 Saving the parameter adjustment data . . . . . . . . . . . . 508 Maintenance and fault rectification8.1 Maintenance, cleaning . . . . . . . . . . . . . . . . . . . . . . . 518.2 Remove interferences . . . . . . . . . . . . . . . . . . . . . . . . 518.3 Exchanging the electronics module . . . . . . . . . . . . . . 528.4 Software update . . . . . . . . . . . . . . . . . . . . . . . . . . . . 538.5 Instrument repair . . . . . . . . . . . . . . . . . . . . . . . . . . . 539 Dismounting9.1 Dismounting steps . . . . . . . . . . . . . . . . . . . . . . . . . . 559.2 Disposal . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5510 Supplement10.1 Technical data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5610.2 Dimensions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 65Supplementary documentationInformation:Supplementary documents appropriate to the ordered version comewith the delivery. You can find them listed in chapter "Productdescription".Instructions manuals for accessories and replacement partsTip:l 27835 - Indicating and adjustment module PLICSCOMl 32628 - Interface adapter VEGACONNECTl 27720 - External indication VEGADIS 61l 34296 - Protective coverl 31088 - Flanges according to DIN-EN-ASME-JISl 30176 - Electronics module VEGAPULS series 60l 31381 - Antenna impedance cone VEGAPULS 62 and 68VEGAPULS 68 • 4 … 20 mA/HART two-wire 3Contents29261-EN-0903051 About this document1.1 FunctionThis operating instructions manual provides all the information youneed for mounting, connection and setup as well as importantinstructions for maintenance and fault rectification. Please read thisinformation before putting the instrument into operation and keep thismanual accessible in the immediate vicinity of the device.1.2 Target groupThis operating instructions manual is directed to trained qualifiedpersonnel. The contents of this manual should be made available tothese personnel and put into practice by them.1.3 Symbolism usedInformation, tip, noteThis symbol indicates helpful additional information.Caution: If this warning is ignored, faults or malfunctions canresult.Warning: If this warning is ignored, injury to persons and/or seriousdamage to the instrument can result.Danger: If this warning is ignored, serious injury to persons and/ordestruction of the instrument can result.Ex applicationsThis symbol indicates special instructions for Ex applications.l ListThe dot set in front indicates a list with no implied sequence.à ActionThis arrow indicates a single action.1 SequenceNumbers set in front indicate successive steps in a procedure.4 VEGAPULS 68 • 4 … 20 mA/HART two-wire1 About this document29261-EN-090305