Vega VEGAPULS WL 61 Quick Setup Manual

Also see for VEGAPULS WL 61: Operating instructions Operating instructions Quick setup guide Operating instructions Quick setup guide

Contents

Vega VEGAPULS WL 61 Quick Setup Manual Manual pdf 16 page image

166 Setup with PACTwareVEGAPULS WL 61 • 4 … 20 mA/HART two-wire47095-EN-140801VEGAMET 381on121 2%1324OPENTWISTUSBLOCKFig. 12: Connection of the PC to the VEGAMET signal conditioning instrument1 Sensor2 Connection cable with 2 mm pins3 Signal conditioning instrument, e.g. VEGAMET 3814 Interface adapter VEGACONNECT6.2 Parameter adjustment with PACTwareFor parameter adjustment of the sensor via a Windows PC, the con-figuration software PACTware and a suitable instrument driver (DTM)according to FDT standard are required. The up-to-date PACTwareversion as well as all available DTMs are compiled in a DTM Collec-tion. The DTMs can also be integrated into other frame applicationsaccording to FDT standard.Note:To ensure that all instrument functions are supported, you shouldalways use the latest DTM Collection. Furthermore, not all describedfunctions are included in older firmware versions. You can downloadthe latest instrument software from our homepage. A description ofthe update procedure is also available in the Internet.Further setup steps are described in the operating instructions manu-al "DTM Collection/PACTware" attached to each DTM Collection andwhich can also be downloaded from the Internet. Detailed descrip-tions are available in the online help of PACTware and the DTMs.Via interface adapter tothe VEGAMET signal con-ditioning instrumentPrerequisites