Vega VEGASON 61 Operating Instructions Manual

Also see for VEGASON 61: Quick setup guide Operating instructions Operating instructions Operating instructions Operating instructions

Contents

Vega VEGASON 61 Operating Instructions Manual Manual pdf 25 page image

255 Connecting to power supplyVEGASON 61 • Foundation Fieldbus28790-EN-1506035.6 Switch-on phaseAfter VEGASON 61 is connected to voltage supply or after voltagerecurrence, the instrument carries out a self-check for approx. 30seconds. The following steps are carried out:• Internal check of the electronics• Indication of the instrument type, the firmware as well as the sen-sor TAGs (sensor designation)• Status byte goes briefly to fault valueThen the current measured value will be displayed and the corre-sponding digital output signal will be outputted to the cable.1)Switch-on phase1) The values correspond to the actual measured level as well as to the settingsalready carried out, e.g. default setting.