Vega VEGASON 63 Operating Instructions Manual

Also see for VEGASON 63: Operating instructions Quick setup guide

Contents

Vega VEGASON 63 Operating Instructions Manual Manual pdf 28 page image

6 Set up with the indicating andadjustment module PLICSCOM6.1 Short descriptionThe indicating and adjustment module is used for measuredvalue display, adjustment and diagnosis. It can be mounted inthe following housing versions and instruments:l All sensors of the plics® instrument family, in the single aswell as in the double chamber housing (optionally in theelectronics or connection compartment)l External indicating and adjustment unit VEGADIS 61From a hardware revision …- 01 or higher of the indicating andadjustment module resp. …- 03 or higher of the correspondingsensor electronics, an integrated backlight can be switched onvia the adjustment menu. The hardware revision is stated onthe type label of the indicating and adjustment module or thesensor electronics.Information:This function is for instruments with StEx, WHG or shipapproval as well as country-specific approvals such as thoseaccording to FM or CSA, available at a later date.Note:You will find detailed information on the adjustment in theoperating instructions manual of the "Indicating and adjustmentmodule".6.2 Insert indicating and adjustment moduleThe indicating and adjustment module can be inserted into thesensor and removed again at any time. It is not necessary tointerrupt the power supply.Proceed as follows:1 Unscrew the housing cover2 Place the indicating and adjustment module in the desiredposition on the electronics (you can choose any one of fourdifferent positions - each displaced by 90°)3 Press the indicating and adjustment module onto theelectronics and turn it to the right until it snaps in.Function/ConfigurationMount/dismount indicatingand adjustment moduleSet up with the indicating and adjustment module PLICSCOM28 VEGASON 63 - 4 ... 20 mA/HART28777-EN-070507