Vega VEGATOR 142 Operating Instructions Manual

Vega VEGATOR 142 Operating Instructions Manual Manual pdf 8 page image

83 Product descriptionVEGATOR 142 •46839-EN-190626dividual current by using the potentiometer. The output relay switcheswhen this current is reached (in dependence on the set mode).Wide range power supply with a nominal voltage of 24 … 230 V AC,50/60 Hz or 24 … 65 V DC.Detailed information about the power supply can be found in chapter"Technical data".3.3 AdjustmentAll adjustment elements are located under a hinged front cover. Theoperating mode and the switching delay can be set via a DIL switchblock. The switching point can be adjusted via a potentiometer.3.4 Packaging, transport and storageYour instrument was protected by packaging during transport. Itscapacity to handle normal loads during transport is assured by a testbased on ISO 4180.The packaging of standard instruments consists of environment-friendly, recyclable cardboard. For special versions, PE foam or PEfoil is also used. Dispose of the packaging material via specialisedrecycling companies.Transport must be carried out in due consideration of the notes on thetransport packaging. Nonobservance of these instructions can causedamage to the device.The delivery must be checked for completeness and possible transitdamage immediately at receipt. Ascertained transit damage or con-cealed defects must be appropriately dealt with.Up to the time of installation, the packages must be left closed andstored according to the orientation and storage markings on theoutside.Unless otherwise indicated, the packages must be stored only underthe following conditions:• Not in the open• Dry and dust free• Not exposed to corrosive media• Protected against solar radiation• Avoiding mechanical shock and vibration• Storage and transport temperature see chapter "Supplement -Technical data - Ambient conditions"• Relative humidity 20 … 85 %Voltage supplyPackagingTransportTransport inspectionStorageStorage and transporttemperature