CAMIP3_v2 VELLEMAN- 3 -CAMIP3 – IP CAMERA (NETWORK CAMERA)1. IntroductionTo all residents of the European UnionImportant environmental information about this productThis symbol on the device or the package indicates that disposal of the device after its lifecycle could harmthe environment.Do not dispose of the unit (or batteries) as unsorted municipal waste; it should be taken to a specializedcompany for recycling.This device should be returned to your distributor or to a local recycling service.Respect the local environmental rules.If in doubt, contact your local waste disposal authorities.Thank you for choosing Velleman! Please read the manual thoroughly before bringing this device into service. If thedevice was damaged in transit, don't install or use it and contact your dealer.2. Quick Start• Connection to the LANConnect the network cable to the RJ45 port.Connect the power adapter to the power socket and connect the adapter tothe mains.Start up your computer and make sure it connects to the LAN. Click Start >Running and enter Command (Windows® 95/95/ME) or Cmd (Windows®2000/XP). Select OK, enter ipconfig and press Enter.The basic setting of your network will look as illustrated.Record the IP address, the subnet mask and the default gateway. Thisinformation can be used to set your device.Insert the CD into the CD-ROM drive and copy the VilarWizard_CN.exe fileonto your computer. Open the file. The interface will pop up.This interface shows us all the IP cameras in your LAN. Press the refreshbutton to refresh the list.If your LAN contains many cameras, find your camera by checking theserial number.