W Audio DQM Series User Manual

Contents

W Audio DQM Series User Manual Manual pdf 4 page image

www.prolight.co.uk DQM Series User Manual4Receiver frontpanel identification:1. Power SwitchOn/Off control for the system receiver.2. IR TransceiverThe IR transceiver is used tocommunicate with the systemstransmitters during setup.3. ACT ButtonAllows the user to activate the IR syncfunction for the selected channel.4. OLED DisplayThe receiver features a backlit displayallowing the user to see informationabout the receiver including frequency,channels, audio and RF status.5. Volume ControlThe receivers output volume isadjustable. Turn the level control anticlockwise to the lowest setting, orturn clockwise to adjust to the highestsetting. Each channel features anindependent volume control.6. SCAN buttonPress the SCAN button to active thereceivers scan function, the receiverwill survey the wireless signals availablewithin reception range.7. MENU ControlRotary jog wheel with push to enterfunction. This allows the user tonavigate the receivers menu system.8. SW ButtonPress the SW select button to accessthe menu for each individual receiveror all of the receivers. The display willdim/highlight to show which receiverchannels are selected.Receiver rear panelidentification:9. DC Power InputThe receiver is powered by a standardDC power input 12-18V DC, 800mAregulated voltage supply.10. Audio (MIX) Output6.35mm (1/4”) jack socket outputtingan unbalanced, line level audio outputfeaturing both audio channels.11. Antenna – Channel A/B & C/DThe antenna receives the RF radiosignal from the transmitter unit. Foroptimum reception, orientate vertically.Keep away from obstacles such aswalls, floors, power amplifiers andsteelwork.12. Balanced Audio Outputs A/B/C/DIndividual, balanced audio outputs via3 pin XLR for audio channel.Operating instructions1 3 4 5 6 79 10 11 122 8