163. Installation of Water-proof Jacket (supplied)It is recommended to adopt the water-proof jacket (supplied) for the network interface when the camera is installedoutdoor.Steps:e) If the network cable has been settled down, cut off the plug of the network cable first.f) Route the network cable through the following components in sequence: fix nut, water-proof ring, and the main bodyof the water-proof jacket, as shown in the figure.g) Insert the water-proof ring into the main body of the water-proof jacket, to increase the sealing ability of thecomponents.h) Wire the plug and network cables up.i) Fix the O-ring to the network interface of the camera, and then connect the network cables.j) Wrap the network interface with the main body of the water-proof jacket, and then rotate the fix nut clockwise toassemble it to the main body of the water-proof jacket.Network Interface O-ring Plug Water-proof Jacket Water-proof Ring Fix Nut Network CableAccessing via Web BrowserSystem Requirement:Operating System: Microsoft Windows XP SP1 and above version / Vista / Win7 / Server 2003 / Server 2008 32bitsCPU: Intel Pentium IV 3.0 GHz to Core i7-4000 series or higher, depending on different video resolutionsRAM: 1G or higherDisplay: 1024×768 resolution or higherWeb Browser: Internet Explorer 7.0 and above version, Apple Safari 5.02 and above version, Mozilla Firefox 3.5 and aboveversion and Google Chrome8 and above versionTo view and configure the camera via LAN (Local Area Network), you need to connect the network camera in the samesubnet with your PC.The following figure shows the cable connection of network camera and PC:Steps:1. Open the web browser.2. In the browser address bar, input the IP address of the network camera, e.g., 192.0.0.64 and press the Enter key toenter the login interface.3. Input the user name and password.4. Click Login.