WAGNER GA 4000ACIC-S Translation Of The Original Operating Manual

Also see for GA 4000ACIC-R: Operating manual Translation of the original operating manual

Contents

13VERSION 05/2018 ORDER NUMBER DOC 2312956 GA 4000ACIC4.1.2 A SAFE WORK ENVIRONMENTHazard due to dangerous fluids or vapors!Severe or fatal injuries due to explosion hazard or inhalation, swallowing or contact withthe skin or eyes.Ensure that the floor in the working are is static dissipative in accordance withEN 61340-4-1 (resistance must not exceed 100 M ).Paint mist extraction systems/ventilation systems must be fitted on site accordingto local regulations.Make sure that the ground connection and potential equalization of all system partsare reliable and continuous and can withstand the expected stress (e.g. mechanicalstress, corrosion).Ensure that product/air hoses that have been adapted to the working pressure areused.Ensure that personal protective equipment (see Chapter 4.2.1) is available and isused.Ensure that all persons within the working area wear static dissipative shoes.Footwear must comply with EN 20344. The measured insulation resistance must notexceed 100 M .Protective clothing, including gloves, must comply with EN 1149-5. The measuredinsulation resistance must not exceed 100 M .Ensure that there are no ignition sources such as naked flames, sparks, glowingwires, or hot surfaces in the vicinity. No smoking.Ensure that the pipe joints, hoses, equipment parts and connections arepermanently, technically leak-proof:– Periodic preventative maintenance and service (replacing hoses, checkingtightness of connections, etc.).– Regular monitoring of leaks and defects via visual inspection and odor testing,e.g. daily before commissioning, at the end of work or weekly.In the event of defects, immediately bring the device or system to a stop andarrange to have repairs carried out immediately.4.1.3 PERSONNEL QUALIFICATIONSHazard due to incorrect use of device!Risk of death due to untrained personnel.Ensure that the operating personnel has been instructed by the operator inaccordance with the operating manual and the operating instructions. The devicemust only be operated, maintained and repaired by trained personnel. Refer to theoperating instructions for information about the required personnel qualifications.