WAGNER GM 4700AC-H Translation Of The Original Operating Manual

Also see for GM 4700AC: Operating manual Original operating manual

Contents

WAGNER GM 4700AC-H Translation Of The Original Operating Manual Manual pdf 8 page image

8GM 4700ACOPERATING MANUALVERSION 09/2011 ORDER NUMBER DOC 23117302.2.4 CLEANING2.2.5 HANDLING HAZARDOUS LIQUIDS, VARNISHES AND PAINTS2.2.6 TOUCHING HOT SURFACES2.3 CORRECT USEDe-energize the unit electrically.Disconnect the pneumatic supply line.Relieve the pressure from the unit.Ensure that the flash point of the cleaning agent is at least 5 K above the ambienttemperature.To clean, use only solvent-damped cloths and brushes. Never use hard objects or spraycleaning agents on with a gun.An explosive gas/air mixture forms in closed containers.When cleaning units with solvents, never spray into a closed container.Ground the container.When preparing or working with paint and when cleaning the unit, follow the workinginstructions of the manufacturer of the paints, solvents and cleaning agents beingused.Take the specified protective measures, in particular wear safety goggles, protectiveclothing and gloves, as well as hand protection cream if necessary.Use a mask or breathing apparatus if necessary.For sufficient health and environmental safety: Operate the unit in a spray booth or ona spraying wall with the ventilation (suction) switched on.Wear suitable protective clothing when working with hot materials.Touch hot surfaces only if you are wearing protective gloves.When operating the unit with a coating material with a temperature of > 43 °C;109.4 °F:- Identify the unit with a warning sticker "Warning - Hot Surface".Order No.9998910 Instruction sticker9998911 Protection stickerWAGNER accepts no liability for any damage arising from incorrect use.Only use the unit to work with the materials recommended by WAGNER.Only operate the unit as a whole.Do not deactivate safety fixtures.Use only WAGNER original spare parts and accessories.