WAGNER GM 50000EAC Translation Of The Original Operating Manual

Contents

59OPERATING MANUALEDITION 05/2015 ORDER NUMBER DOC2319150DANGERIncorrect maintenance/repair!Danger to life and equipment damage.Only a WAGNER service center or a suitably trained person maycarry out repairs and replace parts.Only repair and replace parts that are listed in the Chapter"Spare parts" and that are assigned to the unit.Before all work on the device and in the event of work interruptions:- Switch off the energy and compressed air supply.- Relieve the pressure from the spray gun and device.- Secure the spray gun against actuation.Observe the operating manual and service manuals at all timeswhen carrying out work.For the safe operation of electrostatic manual coating systems for flammable liquid coating products, intervals forperiodical inspections are defined as follows:Inspection point Inspection interval RemarksGun cleaning, gun fl ushing daily Chapter 4.2.4, Chapter 8.1.3Hoses, tubes, couplings daily Chapter 8.2.4Grounding weekly Chapter 4.2.2, Chapter 6.4.5Inspection for damage weekly Chapter 8.1.3, 8.2, 10Locking of the technical ventilation with theelectrostatic manual spraying unitannually Chapter 6.4.2The above recommended intervals are maximum values and may be modified by the operator depending onthe local and operational conditions and the contamination.Damaged devices must be decommissioned and repaired immediately.8.2.3 SAFETY CHECKS