WAGNER PEM-T3 Operating Manual

Contents

Preparing the spray gun8 0351709 - PEM-T3 03/2008• Connect the spray gun to the Tribo current measuring or display module with the electricalcable.• Connect the powder hose to the spray gun and to the powder injector.• Connect the hose for Tribo air to the spray gun and to the control unit.2.3 GroundingFor safety reasons, the spray gun must be properly grounded. This occurs through theelectrical cable.0203_ .docGood grounding of the workpiece is also necessary for optimum powder coating.A poorly grounded workpiece causes:• dangerous electric charging of the workpiece• back-spray onto spray gun and user• uneven coating• very bad wrap aroundWarningSparks between workpiece and conveyor hooks (hangers) can occur if hooks orother hanger parts are not completely cleaned!These sparks can cause heavy radio frequency interference.