WAGO 750-616/040-000 Manual

WAGO-I/O-SYSTEM 750 XTR Notes about this Documentation 5750-616/040-000 Distance Module XTRManualVersion 1.1.01 Notes about this DocumentationAlways retain this documentation!This documentation is part of the product. Therefore, retain the documentationduring the entire service life of the product. Pass on the documentation to anysubsequent user. In addition, ensure that any supplement to this documentationis included, if necessary.1.1 Validity of this DocumentationThis documentation is only applicable to the I/O module 750-616/040-000(Distance Module XTR).The I/O module 750-616/040-000 shall only be installed and operated accordingto the instructions in this manual, in the system description for the WAGO-I/O-SYSTEM 750 XTR and in the manual for the used fieldbus coupler/controller.Consider power layout of the WAGO-I/O-SYSTEM 750 XTR!In addition to these operating instructions, you will also need the systemdescription “Design Notes XTR – Guidelines and Recommendations forIncreasing Operational Safety” and the manual for the used fieldbuscoupler/controller, which can be downloaded at www.wago.com. There, you canobtain important information including information on electrical isolation, systempower and supply specifications.1.2 CopyrightThis Manual, including all figures and illustrations, is copyright-protected. Anyfurther use of this Manual by third parties that violate pertinent copyrightprovisions is prohibited. Reproduction, translation, electronic and phototechnicalfiling/archiving (e.g., photocopying) as well as any amendments require thewritten consent of WAGO Kontakttechnik GmbH & Co. KG, Minden, Germany.Non-observance will involve the right to assert damage claims.