WAGO WAGO-I/O-SYSTEM 750 Series Manual

Also see for WAGO-I/O-SYSTEM 750 Series: Manual Manual Manual Manual Manual

Contents

WAGO WAGO-I/O-SYSTEM 750 Series Manual Manual pdf 15 page image

750-655 [AS-Interface master module] ï 15Technical dataWAGO-I/O-SYSTEM 750I/O Modules2.1.1.5 Technical dataModule-specific dataAS-Interface specification 2.1Number of slaves up to 62Current consumption (AS-Interface)40 mASupply voltage (AS-Interface) 26.5 V ... 31.6 VAS-Interface cable length max. 100 m, with repeater 300 mCycle time AS-Interface 0.3 ms ... 10 ms, depending on number of slavesConfiguration via process image, WAGO-I/O-CHECK 2or AS-Interface mode contactsTransmission channel 1Current consumption max. (internal) 55 mASupply voltage DC 24 V via power contactsPotential isolation 500 V system / supply / AS-Interface connection pointData width 12 ... 48 bytes max. freely configurable,including 1 byte control / statusDimensions (mm) W x H x L 12 x 64* x 100* from upper edge of mounting rail DIN 35Weight ca. 70 gNorms and Directives (cf. Chapter 2.2 in manual for coupler/controller)EMC Immunity to interference CE according to EN 61000-6-2 (1996), EN 50295 (1999)EMC Emissions of interferenceCEaccording to EN 61000-6-4 (2001)Approvals (cf. Chapter 2.2 in manual for coupler/controller)CULUS (UL508)Conformity MarkingMore InformationDetailed references to the approvals are listed in the document "OverviewApprovals WAGO-I/O-SYSTEM 750", which you can find on the CD ROMELECTRONICC Tools and Docs (Item-No.: 0888-0412)or in the internet under:www.wago.com ! Documentation ! WAGO-I/O-SYSTEM 750 !System Description