WALKER FILTRATION PROSFD Series Manual
                                                          | |
Contents
| 
19Section 4: Mechanical InstallationInstalling the hygrometer (DMC models only)PD0046 – PD0360 models• Remove hygrometer from packaging.• Carefully remove plastic cover from the sensor.• Hygrometer sample block is pre-installed in the dryer’stop manifold assembly. Remove cover from threadedport.• Confirm the threads on the hygrometer sampleblock are clean and free from any dirt, water, cuttinglubricant, liquid thread sealant, oil and/or grease.• Per figure 4.11, insert hygrometer into the hygrometersample block and turn to clockwise to tighten.Tighten lightly with adjustable spanner.• Fit hygrometer DIN plug to the hygrometer and tightenscrew with pozi-head screwdriver.HygrometerSample BlockHygrometerHygrometerDIN PlugPD0046 – PD0360 models•Installing the hygrometer (DMC models only)• Remove hygrometer from packaging.• Carefully remove plastic cover from thesensor.••••Hygrometer sample block is pre-installed in the dryer’stop manifold assembly. Remove cover from threadedport.Confirm the threads on the hygrometer sample blockare clean and free from any dirt, water, cuttinglubricant, liquid thread sealant, oil and/or grease.Per figure 4.11, insert hygrometer into the hygrometersample block and turn to clockwise to tighten .Tighten lightly with adjustable spanner.Fit hygrometer DIN plug to the hygrometer andtighten screw with pozi-head screwdriver.Section 4: Mechanical InstallationDo not touch white sensor tube.Open 2 full turns = 5Nl/minHygrometer Silencer SettingFigure 4.11 Attaching hygrometerater, cuttingand/or grease.nto the hygrometerwise to tighten .ner.rometer anddriver.Open 2 full turns = 5Nl/minHygrometer Silencer SettingFigure 4.12 Hygrometer attachedDo not touch white sensor tube.Tools required• Adjustable spanner• Pozi-head screwdriver |
Related manuals for WALKER FILTRATION PD0090
manualsdatabase
Your AI-powered manual search engine