WBOX Technologies WBXML1853 Manual
                                                                                                                                                                 | |
Contents | 
WBXML1853|2153|238310Use the up & down buttons to move the yellow highlighted sub-menu selection within the sub-menu. Pressing the right + & left - buttons will adjust the value of the highlighted item. Press theMENU button to exit the sub-menu and return to the main menu selector.To exit the menu system, press the SOURCE button twice.AdjustmentsH-Position: Image Horizontal positionV-Position: Image Vertical positionClock: Relative adjustment of horizontal scan rate Phase: Relative adjustment of synchAuto Adjust: Press Vol+/Right button to automatically adjust settings to match input signalparametersMounting GuideWall or Other Mounting with VESA StandardCAUTION The wall mount must bear a minimum of five times themonitor’s net weight. To mount your MONITOR to the wall oranother surface, you need to purchase a VESA wall mount. Use fourM4 x 8mm screws (the base attachment screws removed in step 1below are M4 x 8mm) to attach the mount. The monitor mountVESA hole pattern is 100mm x 100mm.Note: Metric (M4 x 8 mm) is the type screw that should be used (do not use longer screws or themonitor may be damaged).1. Before mounting the monitor, remove the base riser (vertical portion of the base) by removingthe four screws near the top with a screwdriver. Then the base and the riser can be removed.In order to prevent losing these screws, we suggest replacing the screws in their original holes.2. Attach the VESA mount (100mm x 100mm) plate to the rear of the monitor and follow all of theinstructions provided with the mount to complete the mounting process. |
Related manuals for WBOX Technologies WBXML1853
manualsdatabase
Your AI-powered manual search engine