Wachs TC 4.5 Manual
                  | |
TUBE CUT OFF SAW TC 4.59E. Machining Instructions1. Set speed control on back of motor, see chart onpage 11.2. Squeeze trigger on motor and lock trigger on.(Figure 7)3. Use motor handle to rotate cutter gear box clock-wise (Figure 8).4. Rotate cutter gear box clockwise 360°.5. After completion, squeeze trigger on motor to re-lease lock on trigger.Figure 5Figure 6C. Workpiece Clamping1. To open vise, rotate vise handle counter clock-wise.2. Do not Damage blade or cut line indicator whenpositioning workpiece in vise.3. Secure workpiece in vise, rotate handle clock-wise.D. Setting Blade Depth1. Clamp workpiece in vise with end of workpiecebehind edge of blade. (Figure 5)2. Rotate cutter gear box 45° (clockwise) to en-gage cutter gear box.3. Rotate cutter depth knob until blade penetratesworkpiece I.D. by 1/16”. (Figure 6)4. Rotate cutter gear box 45° (counterclockwise)to its start point.5. Blade depth will need adjustment as work di-ameter is changed.SECTION V TC 4.5 SETUP & OPERATING PROCEDURES (CONT.)Figure 7CAUTION: Beware of fallingpipe when cutting long lengths.CAUTION: NEVER lubricateVise Screw.Lubrication can loosen vise while cut-ting causing danger to the operator.Figure 8 |
Related manuals for Wachs TC 4.5
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine