Wacker Neuson BH23 Operator's Manual

Also see for BH 65: Operator's manual Operator's manual Operator's manual

Contents

Wacker Neuson BH23 Operator's Manual Manual pdf 48 page image

13 Storage4813 StorageIf the machine will not operated for a while, e.g. during the winter, do the follow-ing:Performing preparations1. Switch off the engine.2. Remove tool.3. Lean the machine upright against a solid object and secure it to prevent itfrom toppling over.Wacker Neuson recommends to hang the machine on the truck.4. Let machine cool off.Emptying the fuel systemThe gasoline in the fuel partially evaporates during long-term storage. The two-cycle oil in the fuel does not evaporate. After long-term storage the mixture ratioof gasoline to two-cycle oil is no longer correct. For this reason, the fuel systemmust be be empty for long-term storage.1. Remove any dirt around the fuel cap.2. Unscrew and remove fuel cap.3. Pump the fuel out into a suitable container or tank, e.g. with a suction pump.4. Position the fuel cap and tighten it.5. Start the engine and let it idle until the fuel in the carburetor is used up andthe engine stops.Storing the machine1. Clean the machine.2. Oil areas such as the tool holder and the handle, where there is a risk of rust-ing.3. Store the machine in a dry place.WARNINGDanger of fire and explosions by fuel.Any fuel that escapes can ignite and cause severe burns.f Lift and move the machine in the upright position.