Safety Information BS 60-2i, BS 70-2i18 wc_si000496gb.fm• Do not refuel if the machine is positioned in a truck fitted with aplastic bed liner. Static electricity can ignite the fuel or fuel vapors.2.5 Service SafetyA poorly maintained machine can become a safety hazard! In orderfor the machine to operate safely and properly over a long period oftime, periodic maintenance and occasional repairs are necessary.Personal Protective Equipment (PPE)Wear the following Personal Protective Equipment (PPE) whileservicing or maintaining this machine:• Close-fitting work clothes that do not hinder movement• Safety glasses with side shields• Hearing protection• Safety-toed footwearIn addition, before servicing or maintaining the machine:• Tie back long hair.• Remove all jewelry (including rings).Service trainingBefore servicing or maintaining the machine:• Read and understand the instructions contained in all manualsdelivered with the machine.• Familiarize yourself with the location and proper use of allcontrols and safety devices.• Only trained personnel shall troubleshoot or repair problemsoccurring with the machine.• Contact Wacker Neuson Corporation for additional training ifnecessary.When servicing or maintaining this machine:• Do not allow improperly trained people to service or maintain themachine. Personnel servicing or maintaining the machine mustbe familiar with the associated potential risks and hazards.2.5.1 Do not attempt to clean or service the machine while it is running.Rotating parts can cause severe injury.2.5.2 DO NOT operate the machine without an air cleaner.2.5.3 DO NOT remove air cleaner cover, paper element, or precleaner whileengine is running.2.5.4 DO NOT alter engine speeds. Run the engine only at speeds specifiedin the Technical Data Section.WARNING