Disassembly/Assembly Procedures GP Repairwc_tx000549gb.fm 1107.5 Replacing the MufflerSee Graphic: wc_gr003136Removal:7.5.1 Disconnect the spark plug.7.5.2 Remove the screw (a) that secures the muffler guard and thegenerator mounting leg (b) to the shock mount bracket.7.5.3 Remove the screws (c) that secure the muffler guard to the frame.7.5.4 Remove the six screws (d) that secure the muffler guard halvestogether and remove the outer muffler guard (e).Note: For clarity, the engine and muffler are shown removed from thegenerator frame.7.5.5 Remove the two nuts (f) that secure the muffler to the engine andremove the muffler and the inner muffler guard (g) from the engine.Installation:7.5.6 When installing the muffler, the inner muffler guard (g) will need to bepositioned before installing the two nuts that secure the muffler to theengine. To do so, slide the inner muffler guard over the muffler.Position the inner guard so that the muffler is able to mate with thegasket and engine exhaust manifold. Then, using two nuts (f), securethe muffler and the inner muffler guard to the engine.7.5.7 Secure the outer muffler guard (e) to the inner muffler guard with sixscrews (d).7.5.8 Install the screws (c) that secure the muffler guard to the frame.7.5.9 Secure the muffler guard and the generator mounting leg to the shockmount bracket using screw (a) and nut.7.5.10 Reconnect the spark plug.
