Wacker Neuson GP 5600A Operator's Manual

Also see for GP 5600A: Operator's manual Repair manual Operator's manual

Contents

Wacker Neuson GP 5600A Operator's Manual Manual pdf 29 page image

GP/GPS 5600A Operationwc_tx000789gb.fm 293.9 Grounding the GeneratorLocationA ground connection (a) is located on the generator frame.FunctionThis ground connection is used for electrically grounding thegenerator when necessary to comply with the National ElectricalCode and other federal, state, and local regulations. For groundingrequirements in your area, consult with a qualified electrician,electrical inspector, or local agency having jurisdiction over electricalcompliance.• If the generator is used at a construction site, there may beadditional regulations which must be observed.• In some areas, generators are required to be registered with localutility companies.• There is a conductor between the generator (stator neutralwinding) and the frame.3.10 Operating Heavy LoadsLimit operations requiring the maximum rated output of 5600 W to 20–30 minutes. For continuous operation do not exceed the continuousrated output of 5000 W.NOTICE: DO NOT exceed the current limit specified on the controlpanel for any receptacle.wc_gr000544