Wacker Neuson LB 1 Operator's Manual
                      | |
Contents
| 
LB 1 Operationwc_tx000741gb.fm 112.3 Setting up the TripodPrerequisites TripodProcedure Follow the procedure below to set up the tripod.1. Unfold the tripod legs.2. One of the legs has its own locking clamp (a). If the ground is not level, loosenthis clamp and adjust the length of the leg so that the mast is vertical.3. The mast should not touch the ground. Adjust the mast so that it is at least 6 cm(2 inches) from the ground.4. Adjust the braces (b) so that they are parallel to the ground.The tripod is now ready for the balloon.WARNINGElectric shock hazard. Electric shock can cause serious injury or death.f Never connect the light to its power source and never turn it on until it has beenfully unpacked and assembled to the tripod!6 cm(2 in.)b |
Related manuals for Wacker Neuson 0620340
manualsdatabase
Your AI-powered manual search engine