Wacker Neuson VP 1340A Operator's Manual

Also see for VP1340A US: Operator's manual Operator's manual

Wacker Neuson VP 1340A Operator's Manual Manual pdf 30 page image

Maintenance VP 1340A/VP 1550Awpm_tx001088gb.fm 284.14 TroubleshootingProblem / Symptom Reason / RemedyPlate does not develop fullspeed. Poor compaction.• Engine throttle control not completely open.• Throttle control not adjusted correctly.• Ground too wet, plate sticking. Allow soil to drybefore compacting.• Drive belt loose or worn, slipping on pulleys. Adjustor replace belt. Check that engine mounting boltsare tight.• Exciter bearings binding. Check condition and levelof oil in exciter. Add or change oil.• Air filter clogged with dust, reducing engine perfor-mance. Clean or replace air filter.• Engine speed too low. Check engine speed withtachometer. Adjust or repair engine to run at correctspeed. Refer to engine manual.Engine running, no vibration • Engine throttle not open.• Drive belt loose or broken. Adjust or replace.• Clutch damaged. Inspect and replace clutch.• Engine speed too low. Check engine speed.• Too much oil in exciter. Adjust oil to correct level.Plate jumps or compactsunevenly.• Ground surface too hard.• Shockmounts loose or damaged.

/ 32

Related manuals for Wacker Neuson VP1340A US