Wacom DTU-710 - MANUAL 2 User Manual
Also see for DTU-710: Installation guide and user's manualSafety instructions
                                     | |
Contents
| 
253.Using the OSD controls, open the OSD Menu and select the PITCH icon.4.Adjust the Pitch level so the pattern of fine vertical stripes displays evenly.5.In the OSD Menu, select the Phase icon and adjust the Phase level so theadjustment pattern shows clearly.6.After completing the adjustments press the ENTER ( ) button and MENU ( )button to exit the OSD Menu.Click on the Cancel button or press ESC to exit the calibration screen.Power Saving(1280 x 1024 resolution under Windows only): You can also adjustPitch and Phase in the closing Windows display.If the pitch is not calibrated, vertical moire appears in thedarkened area. And if the phase is not calibrated, the darkenedarea riffles.HintDTU-710 conforms to VESA and Energy Star power saving guidelines. Whenusing DTU-710 with a VESA DPMS Display Power Management Signaling(DPMS) compliant computer or graphics card, the display will automaticallycomply with the below power saving parameters.Power Saving Mode H-sync V-sync Video Power Consumption Power LampPower ON Yes Yes Active 37W max. BlueStandby mode No Yes Blanked 2W max. Orange/BlueSuspend mode Yes No Blanked 2W max. Orange/BlueOFF mode No No Blanked 1W max. Orange |
Related manuals for Wacom DTU-710
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine