Wagan Elite 400W User Manual
Also see for 400W: User manualUser manualUser manual
         | |
www.wagan.com9Elite™ 400W Pure Sine Inverter by Wagan Tech®©2012 Wagan CorporationAll Rights ReservedWagan and wagan.com are trademarks used by Wagan Corporation 10User’s Manual—Read before using this equipmentTroubleshootingPROBLEM: Low or No Output Voltage – Fault LED LitReason SolutionPoor contact with battery, inverterterminals or DC socket.Clean terminals thoroughly. Reinstalland tighten. Clean DC socket with non-metallic abrasive emery stick.PROBLEM: No Output Voltage – No LEDs LitReason SolutionFuse blown Check vehicle’s Accessory Socket Fuseand if blown, replace with the sametype and rating fuse.PROBLEM: Inverter is Shut Down – Fault LED LitReason SolutionBattery voltage below 10 volts Charge or replace battery.Inverter is too hot (thermal shut downmode).• Allow inverter to cool.• Check for adequate ventilation.• Reduce the load on the inverter torated continuous power output.PROBLEM: Inverter Shut Down – Fault LED LitReason SolutionEquipment being operated draws toomuch power.Use a higher wattage inverter or do notuse this equipment.PROBLEM: Continuous Buzzing SoundReason SolutionInput voltage below 10.5 volts Keep input voltage above 10.5 voltsPoor or weak battery condition. Recharge or replace battery.Poor or loose cable connection Inspect terminals and tighten all con-nections.Inadequate power being delivered tothe inverter or excessive voltage drop.• Use heavier gauge DC cable.• Keep cable length as short aspossible.Disposal/Recycling of InverterElectronic products are known to contain materials that are toxic if improperlydisposed. Contact local authorities for disposal and recycling information. |
Related manuals for Wagan 400W
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine