©2014 Wagan Corporation. All Rights Reserved.Wagan Tech and wagan.com are trademarks used by Wagan Corporation.User’s Manual—Read before using this equipment6OPERATION PROCEDURESAuto On/Off:• The system turns on when any key is pressed or when it senses an input from the speedsensor (i.e. when you begin exercising on it).• The monitor will automatically shut off if there has been inactivity for 4 to 5 minutes.Mode (red button):• This key allows you to select and lock on to a particular function you desire.• Press the button until the arrow poitns at your desired function.• Hold this key for 3–4 seconds to have all function values reset (this is a total reset).METER FUNCTIONTime:1. Press the MODE key until the pointer advances to TIME.2. When the speed sensor receives a signal input, it starts to count.3. Total workout time begins recording when exercise has begun.Calories:1. Press the MODE key until the pointer changes to CALORIE.2. When the speed sensor receives a signal input, it starts to count.3. Total calories expended begins recording when exercise has begun.Reps/Min:1. Press the MODE key until the pointer advances to REPS/MIN.2. When the speed sensor receives a signal input, it starts to count.3. Estimated repetitions per minute begins recording when exercise has begun.Scan:Automatic display of the following functions in the order shown:TIME CALORIES SPEED (REPETITIONS/MIN)Count:Displays steps accumulated since start of exercise.