Wahl BravMini Manual

Also see for BravMini: Instructions

Contents

general safety instructions

}Never insert or allow objects to fall into the openings of the appliance.}When disconnecting the appliance from the mains, never pull on the mains cable or on the appliance itself.}Do not wind the mains cable around the appliance.}Keep the mains cable and appliance away from hot surfaces.}Make sure that the mains cable is not twisted or kinked when charging or storing.}Do not use disposable batteries. Batteries should only be replaced at authorised service centres.General user informationInformation about using the operation manual}Before using the appliance for the first time, you must read and understand the operation manual completely.}Consider the operation manual as part of the product and store it in a safe and accessible place.}Include this operation manual if passing the appliance on to a third party.}In case of conflicts with national safety specifications or instructions, the national requirements must be followed.Explanation of symbols and notesDANGERDanger of electric shock which may result in serious physical injury or death.DANGERDanger of explosion which may result in serious physical injury or death.WARNINGWarning of possible physical injury or a health risk.CAUTIONInformation about danger of material damage.Note with useful information and tips.}Action to be taken by owner.1. Carry out these actions in the sequence described.Product descriptionDescription of parts (Fig. 1)A Blade setB On/off switchC Charging indicatorD Charging standE Charging stand socketF Oil for blade setG Cleaning brushH Attachment combI Plug-in transformerJ Appliance plugTechnical dataHand-held applianceDrive unit: DC motorBattery: NiMH batteryOperating time: up to 100 minutesDimensions (LxWxH): 141 x 32 x 29 mmWeight: approx. 132 gEmission sound pressure level: max. 60 dB(A) @ 25 cmVibration: < 2,5 m/s2Charging standDimensionswith accessories (LxWxH): 72 x 96 x 58 mmWeight: approx. 61 gPlug-in transformerType adapter 6000Power consumption: max. 12 WOperating voltage: 100 – 240 V / 50 – 60 HzThe appliance is safety insulated and radio screened. It meetsthe requirements of EU Electromagnetic Compatibility Directive2004/108/EC and Machinery Directive 2006/42/EC.OperationPreparationKeep the packaging material for safe storage or transport later.}Check that the contents are complete.}Check all the parts for possible transport damage.SafetyHandle with care! Damage due to incorrect power supply.Only operate the appliance with an alternating current and with the voltage stated on the nameplate.Charging the batteryBefore the appliance is used for the first time, it should be charged for approx. 2 hours!1. Connect the appliance plug (J) on the plug-in transformer to the charging stand socket (E) (Fig. 2ⓐ).Battery overcharging is prevented thanks to intelligent charge management.2. Connect the plug-in transformer to the mains socket (Fig. 2ⓐ).3. Switch off the appliance using the on/off switch (Fig. 3ⓐ).4. Place the appliance on the charging station (Fig. 2)·· During charging, the charging indicator (C) flashes at evenly spaced intervals. When the battery is fully charged, the charging indicator flashes at a different rate (10on / 1 off).·· After the appliance has been removed from the charging stand, the display goes out (power saving mode).·· It takes no more than 120 minutes for the appliance to charge to full capacity.Battery operation1. Switch on the appliance using the on/off switch and switch off after use (Fig. 3ⓐ/ⓐ).

/ 4

Related manuals for Wahl BravMini