Walchem LK Series Instruction Manual

Contents

Walchem LK Series Instruction Manual Manual pdf 20 page image

176 Handling InstructionsWarningDo not operate the pump with dangerous or hazardous mediums (such as explosive, combustible,flammable, or toxic substances).CautionRead the following information prior to installation of the pump: Protective gear:When operating the pump or working near it, always wear protective clothing, face guard, goggles,and gloves. Further precautionary measures must be taken depending upon the type of liquid used. Pump repair:Do not try to disassemble or repair the pump beyond the range specified in this instruction manualContact the local distributor for further help.1. Handle the pump carefully.Impacts caused by dropping the pump on the floor or striking it may result in damage or faultyperformance.2. Do not operate the pump under the following condition: where the temperature falls below 0°C where corrosive gas or explosive gas may be present exposed to splashing water where the ambient temperature is 40°C or above where the humidity is excessively high (Permissible humidity: 35~85%RH) places filled with or likely to be filled with explosive or corrosive atmosphere danger due to dust, fire, earthquake and/or any externally imposed shock3. Keep the pump away from fire.To prevent fire and explosions, do not place dangerous or flammable substances near the pump.4. Damaged pump or motorDo not operate a damaged pump due to the possibility of electric shock.5. Pump modificationNever attempt to modify the pump. This may cause a serious accident or damage.6. No disassembly or repairUsers should not disassemble and repair the pump beyond the level given in the "Disassemblyand Assembly" section of this manual.CautionThe pump must be repaired by trained and qualified operators only. If in need of repair,stop operation and contact your supplier for service.