Waldorf 800 Series RN8910GE Installation And Operation Manual

Also see for 800 SERIES: Operation manual Installation and operation manual Installation and operation manual Installation and operation manual Installation and operation manual

Waldorf 800 Series RN8910GE Installation And Operation Manual Manual pdf 11 page image

9InstallationClearancesNOTE: Only non-combustible materials can be used in close proximity to this appliance.* Side clearances can be 50mm when adjacent surface is at least 100mm below cooking surface.AssemblyThis model is delivered completely assembled. Ensure that the legs are securely attached.NOTE:This appliance is fitted with adjustable feet toenable it to be positioned securely and level onuneven floors. This should be carried out oncompletion of gas connection. Refer to 'GasConnection Section'.This appliance can also be fitted with rear rollers toenable appliance to be easily moved for positioningand cleaning purposes. If desired, these rollers aresupplied in packaging, with appliance. See belowfor fitting instructions.Optional Accessories (Refer to Replacement PartsList) Plinth Kit. For installation details, refer to instructionssupplied with each kit.Fitting Rear Rollers.1. Raise appliance from floor by approx. 75mmusing suitable lifting equipment (i.e. Palletiser /Forklift) to allow rear adjustable feet to beremoved.2. Unscrew and remove both rear adjustable feetfrom rear leg housings.3. Fit rear roller to rear leg housing and alignscrew hole in side of rear leg housing withthreaded hole in rear roller.4. Secure rear roller to leg support with boltsupplied and tighten bolt using a 10mm A/Fspanner.5. Fit second roller and tighten.6. Lower appliance back to floor and adjust frontadjustable feet to level appliance.AdjustableFootRear RollerAssyRear LegHousingRollerLocating BoltApplianceBaseFig 1Combustible Surface Non Combustible SurfaceLeft / Right hand side 250mm (*) 0mmRear 100mm 0mm