Sound Parameters – Filter Types79 Waldorf microQ User´s Manual24dB Band Pass and 12dB Band PassThe band pass filters 24dB BP and 12dB BP remove frequencies both below and above the cutoffpoint. As a result, the sound character gets thinner. Use these filter types when programming effectand percussion-like sounds.FrequencyLevelCutoffResonancePicture 22: Band Bass Filter Type24dB High Pass and 12dB High PassThe high pass filters 24db HP and 12dB HP are useful to thin out a sound’s bass frequencies. Thismay also give interesting results in conjunction with cutoff frequency modulation. By doing this youcan e.g. "fly-in" a sound starting at its high harmonics and then coming up to its full frequency range.Use the 24dB slope if you want to create sounds with a typical audible filtered character; use the12dB slope if you want to get softer results.FrequencyLevelCutoffResonancePicture 23: High Pass Filter Type
