Waldorf pulse 2 User Manual
                                                                         | |
Contents
| 
Additional SettingsPulse 2 User Manual 40Additional SettingsGlobal parameters are settings that affect the Pulse 2general response. Global parameters are stored automat-ically when you leave the Global menu, so you are notrequired to save them manually.The Global MenuAll Global parameters are located in the Global Menu.Hold the Shift button and press the Global button toaccess the Global menu. Use the Selection buttons toselect the desired Global parameter, which can be edi-ted with the Selection dial.Mastertune 430...450Controls the Pulse 2 overall pitch in Hertz. The valuespecified here is the reference pitch for MIDI note A3.The default setting is 440Hz, which is commonly usedby most instruments.m You should only change this setting if you reallyknow what you’re doing. You will have to adjustall your other instruments, too. Don’t forget toset it back again!Transpose -24...+24Allows a global pitch transposition for the tone genera-tor. Incoming MIDI notes are shifted by the number ofsemitones.MIDI Channel OMNI / 1...16Sets the basic send and receive channel for the Pulse 2.This setting is valid for all Sound programs. If omni isselected, the Pulse 2 sends on channel 1 and receiveson all channels.m Please use omni only for test purposes if youwish to check the basic MIDI send and receivefunctionality. As soon as you know that the Pul- |
Related manuals for Waldorf pulse 2
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine