Wali M001S-W Installation Manual

Wali M001S-W Installation Manual Manual pdf 1 page image

M001S-WWARNINGUSE OF TIPOVER RESTRAINTS MAY ONLY REDUCE, BUT NOT ELIMINATE RISK OF TIP OVER.SMALL PARTS- NOT FOR CHILDREN UNDER 3 YEARS. ADULT SUPERVISION IS REQUIRED.If you do not understand these directions, or if you have any doubts about the safety of the installation, please call aqualified technician. Check carefully to make sure there are no missing or defective parts. Improper installation maycause damage or serious injury. Do not use this product for any purpose that is not explicitly specified in this manual.Do not exceed weight capacity. We cannot be liable for damage or injury caused by improper mounting, incorrectassembly or inappropriate use.SERIOUS OR FATAL CRUSHING INJURIES CAN OCCUR FROM TIPOVER. TO HELP PREVENT TIPOVER:Single Monitor Desk Mount75x75\100x100VESA Platee (x1)Monitor Armd (x1)C-Clampb (x1)C-Clamp Bracec (x1)Polea (x1)Wire Clipn (x1)Grommet Base Platem (x1)M4 Spacers (x4)M8x12 Boltg (x2)Nuth (x1)M5x14 Boltf (x3)Wrenchp (x1)Allen Keyo (x1)M4x30 Boltr (x4)M4x12 Boltq (x4)M10 Bolti (x1)Support Platej (x1)M10 Washerk (x1)Spring Washerl (x1)INSTALLATION MANUAL1-844-SATTLER (18447288537)support@walielectric.comwww.walielectric.com(10kg/22lbs)RATEDMAX 32”TIPOVER WARNING● NEVER ALLOW CHILDREN TO CLIMB, STAND, HANG, OR PLAY ON ANY PART OF MONITOR OR STAND.● USE TIPOVER RESTRAINT OR ANCHOR STAND TO WALL.Supplied Parts ListOption A : Clamp Installation1. Connect Pole a and C-Clamp Brace c from the bottom using M5x14 Bolt f andtighten with Allen Key 3mm o .12. Select the preferred height according to your desk thickness. Connect C-Clamp b to C-ClampBrace c using M8x12 Bolt g and tighten with Allen Key 5mm o . Rotate the hand knobclockwise to fasten for stability.Hand Knobacccfoooggbba c fooamfOption B : Grommet Base Installation1. Place Pole a onto Grommet Base Plate m . Connect them from the bottom using M5x14Bolt and tighten with Allen Key 3mm .oa m f

/ 2

Related manuals for Wali M001S