Walkdesk WTD200 Owner's Manual
                       | |
Contents | 
4IMPORTaNT OPeRaTION INsTRUCTIONs NEVER operate this treadmill without reading and completely understanding the results of anyoperational change you request from the computer. understand that changes in speed and incline do not occur immediately. set your desired worklevel on the computer console and release the adjustment key. The computer will obey the commandgradually. NEVER use your treadmill during an electrical storm. surges may occur in your household powersupply that could damage treadmill components. unplug the treadmill during an electrical stormas a precaution. use caution while participating in other activities while walking on your treadmill; such as watchingtelevision, reading, etc. These distractions may cause you to lose balance which may resultin serious injury. Do not use excessive pressure on console control keys. They are precision set to function properly withlittle finger pressure.saFeTY TeTHeR CORd a safety tether cord is provided with this unit. It is a simple magnetic design that should be used at alltimes. It is for your safety should you fall or move too far back on the tread-belt.Pulling this safety tether cord will stop tread-belt movement.To use:1. Place the magnet into position on the round metal portion of the console control head.Your treadmill will not start and operate without this. removing the magnet also secures the treadmillfrom unauthorized use.2. Fasten the plastic clip onto your clothing securely to assure good holding power.note: The magnet has strong enough power to minimize accidental, unexpected stopping.The clip should be attached securely to make certain it does not come off. Be familiar with its functionand limitations. The treadmill will stop, depending on speed, with a one to two step coast anytimethe magnet is pulled off the console. use the stop / Pause switch in normal operation. |
Related manuals for Walkdesk WTB100
manualsdatabase
Your AI-powered manual search engine