Walker MT, MTL, MTEFI, MTLEFI Owner's Manual

Also see for MT, MTL, MTEFI, MTLEFI: Detailed instructions Owner's manual Owner's manual

Contents

Operating Instructions37Ignition SwitchThe ignition switch is used to start and stop the en-gine. The switch has three positions: “O” is the OFFposition, RUN is the position the key returns to afterstarting, and “S” is the START position. When start-ing the engine, turn the key clockwise to the “S” po-sition. Do not hold the key in the “S” position longerthan 10 seconds. If the engine does not start, returnthe key to the “O” position for at least 60 seconds be-fore making a restart attempt. Prolonged crankingcan damage the starter motor and shorten batterylife. Release the key when the engine starts, and itwill return to the “RUN” position. To stop the engine,rotate the key counterclockwise to the “O” position.Ignition SwitchLight Switch (For Optional Lights)Operates headlights (when installed).Warning HornThe warning horn sounds to alert the operator thatan unsafe engine condition is being indicated -when engine temperature is too high or engine oilpressure is too low. If the horn sounds, check theindicator lights and correct the problem before fur-ther operation.Circuit BreakersDepending on model, either one or two manual resetcircuit breakers are located on the instrument panel.Each has a button that pops out if the circuit breakertrips. For Models MT and MTEFI, the 7 amp circuitbreaker protects the safety circuits and GHS. ForModel MTL, the 7 amp circuit breaker protects thewarning lights/horn, safety circuits and GHS. ForModel MTL, the 10 amp circuit breaker protects theheadlights. For Model MT, the 30 amp circuitbreaker (located near the battery) protects the in-strument panel and headlights. For Model MTL, thetwo 30 amp circuit breakers protect the instrumentpanel, starter solenoid and ’fan’ control module. ForModel MTEFI, the 30 amp circuit breaker protectsthe instrument panel, headlights, starter solenoidand ECU.ONOFFSTART