Safety Instructions15SAFETY, CONTROL, AND INSTRUCTION DECALSSafety, Control, and Instruction Decals are installed on the machine;if any are missing, illegible, or damaged, a replacement should be ordered and installed beforeputting the machine into operation. The Decal Part Number is listed below and in the Parts Manual.1. Warning – read Operator’s Manual before servic-ing or performing maintenance.• Engage parking brake.• Remove ignition key.2. Forward Speed Control• Move lever forward to increase speed; backto stop.3. Warning – do not operate the machine without adeck or other implement attached.4. PTO Clutch Lever• Move lever forward to disengage PTOclutch; back to engage.5. Warning – do not engage PTO clutch with PTOshaft disconnected.Location: RH FenderPart Number: 8600-33Location: Adjacent to Blower DischargeChute through BodyPart Number: 8600-41. Warning - rotating impeller is a cutting/dismem-berment hazard to fingers and hands.• Never reach down into the blower dischargechute.2. Warning - thrown object hazard.• Never engage the PTO with grass catcherraised.8600-41.2.Location: Engine ShroudPart Number: 58558600-161.Location: Rear Cross Member of Front BodyPart Number: 8600-161. Important - Lower front body before loweringcatcher box.Location: Rear of Grass Catcher Exhaust ScreenPart Number: 58691. 2.2.3.1.4.5.