Wallbox DC Charger 1ph Installation Manual

Contents

Wallbox DC Charger 1ph Installation Manual Manual pdf 8 page image

8ENProduct InformationBox ContentsPart numberSerial numberEAN codeElectricity supply configurationManufacturing date / country12435Your Wallbox box should contain the following:Family PowerModel VersionCable CustomEVC RevisionDC X1 0: 5m J: CHAdeMOS: CCS1: 4.6kW2: 7.4kW- - -Mounting parts• 4 x 6x30mm Screws• 2 x 5x40mm Screws• 4 x Ø6mm Wall anchors• 4 x 5x10mm Screws• 2 x Ø5mm Wall anchorsComponents• Wallbox DC Charger 1ph with charging cable• Installation guide• Mounting parts• Plug holder• WallplateTools required• Flat Screwdrivers: 5mm and 7mm• 10mm Wrench• Drilling machine plus 6mm and 5mm drill bits• Cutter or wall cable cutter• Torx keys: T10 and T25Following tools will be required for mounting your Wallbox:123Note: UID is abcdefg for engineering samplesInstallation InstructionsThe installation of the Wallbox should be undertaken by a qualified electrician in accordance with theapplicable standards and regulations. Preferably the installation should be undertaken by a Wallbox trainedinstaller. Local regulations on electrical installations, fire prevention, and accidents as well as emergency exitsimplemented from installation must be taken into account.