Wallbox Pulsar Plus N.A. Quick Start Manual

3Locating your serial number and UIDYour charger serial number and UID arelocated on the product label placed on theside of your charger.The charger will now appearin your charger list.Basics - SetupQUICK REFERENCE GUIDE3. On the “Add Charger” screen, add the serial number and UIDnumber for the charger you are registering.2. On the app home screen, tap“I already have a charger”.4. Ensure that the location settingis correct for your state/province.5. Tap ADD.Connecting via BluetoothAfter you have linked to and registered your charger via the myWallbox app, you are ready to connect to yourcharger for the first time with your mobile device.Note: In order to configure a Wi-Fi connection you first need to connect to your charger viaBluetooth following these instructions. Once connected via Bluetooth, go to Connecting yourcharger to a Wi-Fi network.You do not need a Wi-Fi connection to manage and control your charger--you can perform thesefunctions via Bluetooth alone. Please note, however, that you will require a Wi-Fi connection in orderto access additional smart home features like voice control.1. Ensure that Bluetooth is enabled on your mobile device. For the best Bluetooth connection, stand near to thecharger with your mobile device without any wall or obstruction in between.2. Launch the myWallbox app on your mobile device and login.3. Select your charger from the charger list.Adding/linking your charger to your myWallbox account1. Launch the myWallbox app and login.Note: Your login username and password are the same that were generated when you created yourmyWallbox account. In case you have forgotten your login information, tap the Forgot Passwordoption to generate a new password.