Wallbox QUASAR User Manual

Also see for QUASAR: Installation guide Installation guide

Wallbox QUASAR User Manual Manual pdf 17 page image

17GESTURESENSORGesture sensorYour Wallbox Quasar has a gesture sensor so that you can control it with simple gestures without havingto use external devices. Make sure you move your hand close to the charger near the sensor shown inthe image below.Face Recognition AuthenticationNote: This feature is only available when your Wallbox Quasar is connected to the Internet. Beforeusing this feature you need to add your front profile photo in your myWallbox account using the Wallboxapp (see “Edit your profile” section). Now you can unlock your Wallbox Quasar using face recognitionauthentication. To do so, use the corresponding gesture to start the process and the charger will takephoto of you automatically. The camera icon will appear on the charger screen. It may take a few secondsfor the charger to unlock.RFID authenticationIn order to use this feature, you only need to enter the RFID code printed on the provided Wallbox RFIDcard into your myWallbox account through the myWallbox portal. Note that only the Administrator of thecharger can enter RFID codes in charger users’ accounts. The RFID authentication requires the chargerto be online in order to update the information about authorized users. It may take up to 30 seconds forthe charger to update user information after a modification in the myWallbox account. Now the systemis ready to let user unlock the charger with the RFID card. To do this, the RFID card must be hold in frontof the RFID reader of the charger at a distance below 5 cm.• Move your hand upwards to increase the charging power.• Move your hand downwards to reduce the charging power.• Move your hand to the left to lock the charger. Thisgesture is enabled as soon as the user has connected tothe charger with the Wallbox app.• While charging, move your hand to the right to pausecharging. Move your hand to the right again to resumethe charging.• Move your hand in any direction to turn on the screen orto start face recognition authentication.Lock / Unlock the chargerThe Wallbox Quasar can be locked to prevent unauthorized use. You can lock it by moving your hand tothe left and unlock it with face recognition. You can also lock and unlock your charger using the Wallboxapp and the myWallbox portal.