6OPERATION INSTRUCTIONSInitial Preparation• Place Waring™ Commercial Conveyor Toaster on levelcountertop with a minimum of a 2" clearance betweenthe side and back walls.NOTE: If unit is not seated properly, the feet areadjustable for balancing.• Remove all parts (reflector/crumb tray and toast drawer)and clean thoroughly before first use.• Replace all parts and plug unit into appropriate outlet(see previous page).• Switch unit to the On position. The red Power Onindicator light will illuminate.IMPORTANT: Make sure the standby switch is in theFull power position (to the left).• When conveyor toaster is ready for toasting, the greenReady indicator light will illuminate. This should takeapproximately 5 minutes.• Turn the conveyor speed control knob to set the desiredtoasting speed.• When the main power switch is turned to the OFFposition, the cooling fan and green ready indicator lightmay stay on up to 5 minutes for cooling.Toasting• Place bread, bagel or muffin to be toasted on wirebread feeder. The conveyor toaster will automatically pullbread into the toasting chamber at the speed set by theconveyor speed control knob.• When complete, toast will slide down bread chute into thetoast drawer.