2 3IMPORTANT SAFEGUARDSWhen using electrical appliances, basic safety precautions shouldalways be followed including the following:1. READ ALL INSTRUCTIONS.2. To protect against risk of electrical shock, do not put appliance inwater or other liquid.3. Always unplug from outlet prior to handling or cleaning.4. This appliance is not intended for use by persons (includingchildren) with reduced physical, sensory or mental capabilities, orlack of experience and knowledge, unless they have been givensupervision or instruction concerning use of the appliance by aperson responsible for their safety.Children should be supervised to ensure that they do not play withthe appliance.5. Unplug from outlet when not in use, before putting on or taking offparts, and before cleaning.6. Avoid contact with moving parts.7. Do not operate any appliance with a damaged cord or plug orafter the appliance malfunctions or is dropped or damaged in anymanner. Return appliance to the nearest authorized service facilityfor examination, repair, or electrical or mechanical adjustment.8. The use of attachments, including canning jars, not recommendedby the appliance manufacturer may cause hazards.9. Do not use outdoors.10. Do not let cord hang over edge of table or counter, or touch hotsurfaces.11. Keep hands and utensils out of container while blending, to preventthe possibility of severe personal injury and/or damage to theblender. A rubber scraper may be used, but must be used onlywhen the blender is not running.12. CAUTION: Blades are sharp. Handle carefully.13. Always operate blender with lid in place.14. When blending hot liquids, remove center piece of two-piece cover.See hot blending instructions, page 5.15. The use of ear protection is recommended during extendedoperating periods.16. Do not leave blender unattended while it is running.17. See cleaning and sanitizing instructions, pages 6-8.NOT FOR WATERJET CLEANING.SAVE THESE INSTRUCTIONSGROUNDING INSTRUCTIONS• For your protection, this appliance is equipped with a 3-conductor cord set.• 120 Volt units are supplied with a molded 3-prong grounding-type plug(NEMA 5-15P) and should be used in combination with a properly connectedgrounding-type outlet as shown in Figure A.If a grounding-type outlet is not available, an adapter, as shown in Figure B,may be used to enable a 2-slot wall outlet to be used with a 3-prong plug.*As shown in Figure C, the adapter must be grounded by attaching itsgrounding lug under the screw of the outlet cover plate.Caution: Before using an adapter, it must be determined that the outletcover plate screw is properly grounded. If in doubt, consult a licensedelectrician.Never use an adapter unless you are sure it is properly grounded.*NOTE: Use of an adapter is not permitted in Canada and Europe.Green/Yellow: Earth Ground. Blue: Neutral. Brown: Live.NOTE: User-installed cord set plugs are not permitted in Europe.MX1200XTX/MX1200XTP/MX1200XTSBLENDER SPECIFICATIONS• Capacity: 64 oz. Working Capacity(48 oz. capacity – MX1200XTP)• Switch Settings: (speeds) Variable Pulse• Speed (RPMs) 1,500–20,000 30,000• Rating: 120 Volts - 13.0 Amps• Base Material: Polycarbonate• Bearing: High Precision Ball Bearing• Cord: 6-Foot Three-Conductor Ground Cord with Strain Relief in Base• Overall Height: 19 Inches• Weight: 15 lbs• CETLUS, NSF listed• Operating Cycle: 1 min. ON/3 min. OFF