Waring PRO WPB User Manual

Contents

6 74. CAUTION: DO NOT use carbonated liquids in the blenderjar or any blending container. Using carbonated liquids inthe blender jar or any blending container may result in injury.5. Put ingredients into container, then put on cover. Alwaysadd liquid ingredients first, unless otherwise specified inrecipe. Always hold container with one hand while blending.6. CAUTION: To avoid damage to your blender, do not run theblender if the blades become blocked or jammed duringuse. Turn the blender off immediately, remove the containerfrom the blender base and dislodge the material that isblocking or jamming the blade.HOW TO ASSEMBLE CONTAINERSWITH REMOVABLE BLADES1. Before starting, make sure that theblender cord is unplugged and thatthe switch is in the off position.2. Refer to Figure 1. The followingpoints are important to note whenputting together the containerassembly:3. Container gasket must be betweenthe blade assembly and thecontainer.4. Container collar must not bemisthreaded onto the container.5. Container collar must be securelytightened onto the containerbefore placing food or liquid in thecontainer.6. Tighten the container collar by holding the container upsidedown and turning the container collarcounterclockwise.7. Place container assembly on unit base so that it is firmlyseated and not tilted to one side. Never place the containercollar or the blade assembly on the unit base unless thecontainer has been completely assembled and securelytightened.HOW TO DISASSEMBLE & CLEANCONTAINERS WITH REMOVABLE BLADES1. Be sure the switch is in the off position.2. Remove the container assembly from the unit base andempty the contents.3. To disassemble the Waring Pro ® Blender containerassembly, turn container collar clockwise.4. The glass container, container collar and blade assemblyare dishwasher safe. The plastic container, lid, measuringcup lid insert and gasket must be washed by hand. Allowall parts to air dry, and reassemble for next use.5. When assembling container after cleaning, be certain allcomponents are in the proper position.6. It is particularly important to place the container gasketbetween the blade assembly and the container.7. Wash and rinse container prior to initial use, andimmediately after each use.HOW TO CLEAN CONTAINERS WITHNONREMOVABLE BLADES1. Remove the container from the unit base. Remove thelid. Add a cup of cleaning solution, made by adding a fewdrops of dishwashing detergent to 1 cup of cool water,to the container. Scrub and flush out the interior of thecontainer and the lid to dislodge and remove as muchresidue as possible. Empty the container.2. Add more cleaning solution. Put lid on container, placecontainer on unit base, and run on high speed fortwo minutes.3. Empty the container and repeat as above, using clean rinsewater in place of cleaning solution. Empty, rinse and dry,prior to storing unit.4. Wash and rinse container prior to initial use, andimmediately after each use.Fig.1